Switching Issues

Go through below checklist to troubleshoot your installation.

I am connected through the management port ETH4 but I am not able to manage the remote site. I am using an Out-Of-Band VLAN configuration?

Remote end management is not permitted through the management ports. In order have a remote end management through the radio link, the In-Band configuration should be selected from the VLAN Management Template.

What type of VLAN configuration should be used when having the management traffic belonging to a VLAN but my payload traffic is untagged?

When the management traffic belongs to a VLAN and the payload traffic is untagged, IEEE802.1 Q should be configured from the VLAN Management Template as per the below example.

I have a LAG configuration and need to send my traffic and manage the remote equipment, which configuration needs to be used?

A LAG interconnect from the VLAN Management Template should be used where the user can choose the port for local and remote management.

We have a double-tagged traffic that we need to load through the link, what VLAN configuration should be used?

Trunk interconnect should be selected from the VLAN Management Template where the user can choose the VLAN ID and port for local management.

Our traffic is untagged, we need the S10 to tag our traffic, what VLAN configuration needs to be used for that?

For the S10 to tag the traffic, IEEE802.1 Q should be configured from the VLAN Management Template as per the below example.

Remote management is not accessible.

The two S10 IPs should be configured within the same subnet.

In addition to that, remote management should be permitted from the VLAN management.